We inform you that the control unit inhibits engine startup during the diagnostic session, except for the CO adjustment procedure.
Once within the diagnostic session the control unit will turn the engine off, if it has been left on, and will inhibit the starter motor.
In order for the vehicle to operate properly after a diagnostic session, you are required to turn the key off and then on again.
WARNING: The makes and distinguishing signs of the vehicles manufacturers included in this document are only provided to inform the reader about the potential suitability of the said TEXA products to be used for the vehicles of the above mentioned manufacturers. References to makes and models contained in this document are to be considered only as a rough guide.
Click the image below to navigate to the website:
