04/11 /2016 Lifting the vehicle on the lift

Before lifting the vehicle with a lift, you must deactivate its automatic suspension control system (PASM - Porsche

Active Suspension Management).

The procedure requires the use of the controls on the central console, for ,more information refer to the vehicle

handbook.

Vehicle lifting mode activation (PASM deactivated)

1. Turn on the instrument panel.

2. Press and hold the suspension control button (A) for approximately 10 seconds.

3. A message will appear on the instrument panel's display warning about the disabling of the vehicle height control system

4. Release the button.

5. Turn off the instrument panel.

6. The vehicle can now be lifted.



The vehicle lifting mode is deactivated automatically by driving it.

Vehicle lifting mode deactivation (PASM reactivated)

1. Turn on the instrument panel.

2. Press and hold the suspension control button (A) for approximately 10 seconds.

3. Release the button.

4. Turn off the instrument panel.



WARNING: The makes and distinguishing signs of the vehicle manufacturers included in this document are only provided to inform the reader about the potential suitability of the said TEXA products to be used for the vehicles of the above-mentioned manufacturers. References to makes and models contained in this document are to be considered only as a rough guide.  


Click the image below to navigate to the website: