Because the CAN line that makes up the communication system has several connection nodes,the connection line of the DTS module may be located in different areas of the boat. On inboard engines it is particularly uncommon for a connection node to be located directly on the engine. On outboard engines, on the other hand, a node can be found directly on the engine.
PLEASE NOTE: In order to avoid signal dispersion we recommend connecting to the node near the DTS control unit whenever possible.
WARNING: The makes and distinguishing signs of the vehicle manufacturers included in this document are only provided to inform the reader about the potential suitability of the said TEXA products to be used for the vehicles of the above-mentioned manufacturers. References to makes and models contained in this document are to be considered only as a rough guide.
Click the image below to navigate to the website:
