Marine Outboard
More recent modules of the selected brand have 2 different diagnostics connectors. Connection on TERMINATOR node The TERMINATOR node is the CAN nod...
Wed, 16 Oct, 2019 at 1:31 PM
Diagnostic tests revealing errors inherent in the ignition coils have shown that in some rare cases it is possible that the ignition coils in question (dati...
Wed, 16 Oct, 2019 at 1:35 PM
During our tests we have noticed that in certain models of engines of the Optimax series dating before 2008, the engine guardian alarm may ring nonstop when...
Wed, 16 Oct, 2019 at 1:44 PM
Because the CAN line that makes up the communication system has several connection nodes,the connection line of the DTS module may be located in different a...
Wed, 16 Oct, 2019 at 3:52 PM
To diagnose an engine not equipped with a battery, you must first start the engine and then connect the diagnostic tool to it and launch the diagnostic sess...
Tue, 15 Oct, 2019 at 12:42 PM
The SPC is an advanced electronic system that manages accelerator and gears for a more fluid, precise response. This system also has the added benefit of co...
Tue, 15 Oct, 2019 at 1:32 PM
During our tests we have found that some engines were experiencing irregular idle, this may be due to an incorrectly adjusted IAC (Idle Air Control) valve. ...
Tue, 15 Oct, 2019 at 12:48 PM
During tests we have found that Suzuki DF 40/50 Four Stroke series engines, the engine control unit sometimes stores a CKP Crankshaft Position Sensor e...
Tue, 15 Oct, 2019 at 1:27 PM
The series of engines equipped with a 6-pin diagnostic socket is not compatible with the corresponding connector (A - colorless) of cable AM30. To carr...
Mon, 14 Oct, 2019 at 1:48 PM
Please note that in some series of Tohatsu engines, after carrying out an activation command via your TEXA software the control unit may enter a "recov...
Mon, 14 Oct, 2019 at 1:55 PM