Marine Inboard
Inboard Engines / Industrial Engines / Generators
The engine switches unit, depending on the configuration, may be integrated into the base of the control lever or into the helm, and communicates with the r...
Wed, 2 Oct, 2019 at 11:50 AM
The throttle lever switches unit is integrated into the control lever, and includes: • Engine start/stop switch (START/STOP) • Neutral switch for warming ...
Wed, 2 Oct, 2019 at 11:54 AM
The vessel CAN bus controls communications between devices. There are two versions of vessel CAN bus interface: standard and smart. Standard CAN bus inter...
Wed, 2 Oct, 2019 at 12:13 PM
IN GENERAL Normally, the idle speed is set to 600 RPM, see (Fig 1). The adjustments has to be carried out when the engine is warm. If the craft is fi...
Thu, 17 Oct, 2019 at 1:02 PM
During our tests we have found that, if the MID 200 CPM (Corrosion Protection Module) is diagnosed when the boat is out of the water, some active errors wil...
Thu, 9 Jan, 2020 at 12:07 PM
During the tests carried out by our technicians it was determined that in order to obtain a better / correct communication with the control unit it is somet...
Thu, 17 Oct, 2019 at 1:08 PM